Trek PZD350A M/S High Voltage Amplifier Driver

High Voltage Amplifier and Piezo Driver, Output Voltage 0 to ±350 VDC or Peak AC

Advanced Energy’s Trek PZD350A M/S offers superior bandwidth capabilities and can be used in laser modulation, piezoelectric vibration damping, semiconductor research, and various other applications.

• Output Voltage: 0 to ±350 VDC or peak AC
• Output Current: 0 to ±400 mA
• Slew Rate: Greater than 500 V/µs
• Large Signal Bandwidth: DC to greater than 250 kHz (-3dB)
• Gain: 0 to 150 V/V, adjustable

Model : Trek PZD350A M/S

Q'ty :

The Trek® PZD350A M/S piezo driver and amplifier system provides precise voltage control and delivers twice the current of Advanced Energy’s Trek PZD350A. In addition to superior bandwidth capabilities, it features an all-solid-state design and impressive slew rates. Voltages for this DC-powered amplifier are factory set to your specified ranges. And a four-quadrant active output stage that sinks or sources current into reactive or resistive loads completely through the output voltage range.

Benefits

Drive capacitive loads via a four-quadrant output
Enable high accuracy thanks to a closed-loop system
Safeguard equipment with short-circuit protection
Benefit from nearly maintenance-free operation and solid-state design
Take advantage of low-output noise and ultra-accurate outputs

Non-inverting input is standard, but an inverting amplifier configuration is available
Remote access
Dynamic adjustment
Precision voltage and current monitors
NIST-traceable calibration certificate provided with each unit

Dimensions: 110 mm H x 432 mm x W 445 mm D (4.3” H x 17” W x 17.5” D)

Weight: 10 kg (22 lb)

HV Connector: SHV High Voltage Connector

Temperature: 0°C to 40°C (32°F to 104°F)

Relative Humidity: To 85%, noncondensing

Altitude: To 2000 meters (6561.68 ft.)