• Monroe 288B Charge Plate Monitor
  • Monroe 288B Charge Plate Monitor
  • Monroe 288B Charge Plate Monitor
  • Monroe 288B Charge Plate Monitor

Monroe 288B Charge Plate Monitor

• Innovative High Voltage electrometer provides tests to unprecedeted low voltage with unmatched stability
• Meets ESD Association Standard ANSI / ESD STM 3.1
• Fully configurable operating parameters
• Soft keys for highly intuitive programming
• Manual and automated testing of Decay and Balance
• Internal storage for up to 1500 tests, 500 locations and 4 test protocols
• Internal battery for portable operation (also line operated)
• Large, easy to read, high contrast LCD display
• Detachable 6” x 6” plate (Optional plate 1” X 1” plate available)
• RS232 interface
• Built in temperature and humidity sensors
• Auto-ranging to 0.1V resolution below 100V
• Compatible with optional 288B Graphing Software
Model : Monroe 288B

The model 288B is the first charged-plate monitor offering on-board data storage to automate ionization system testing. Use the Model 288B to perform the customary manual tests, or program it to perform a series of automated decay and balance tests.

Soft keys simplify the programming and operation of automated tests. Upload test set-ups and ionizer locations. Download stored test results, including environmental data captured by integral temperature and relative humidity sensors. The Model 288B uses a novel voltage-follower measurement technique to increase stability, bandwidth, and accuracy, making it ideal for testing the most modern critical-balance ionizers.

Display

240 x 64 character/graphic

    Voltage – Accuracy Resolution: 3½ digit display (Decay and Peak reading) ±0.1% of reading ±3 V 1 volt

    Balance -:                  0.1 volt for readings < 150 volts

    Time – Accuracy Resolution: 4 digit display 0.1% of reading ±1 lsd 0.1 second for readings < 1000 seconds 1 second for reading > 999 seconds

Electrometer

Dynamic range: ±1200 volts

Follower error: < 10 mV

Speed of Response: <10 msec for 1 kV to 0 volts (90%-10%)

Bandwidth: -3db @ 1Khz 20Vp-p

                    -3db @ 10Hz 2000Vp-p

Noise: < 12 mV rms

Monitor output

Divide by 200

    Accuracy: 0.1% of reading ±1 mV Refer to Output

    Output Impedance: 1K ohm

Start Voltages

1000 volts Standard

    Range: ±10 to ±1000 volts

    Resolution: Settable to 1 volt

    Accuracy: 0.3% of setting ±2.5 volts

Stop Voltages

100 volts Standard

    Range: 0- ±995 volts

    Resolution: Settable to 1 volt

    Accuracy: 0.3% of setting ±2.5 volts

Charge Voltage

Range: 10 to 100 volts above the start voltage

Resolution: Settable to 1 volt increments

Accuracy: 0.3% of setting ±2.5 volts

Charge Plate

Capacitance: 20 pF ±2pf

Zero Drift: < 100 mV/sec (no incident ion flow)

Self Discharge: < 200 mV/sec

Peak Detector
(Balance Test) Bandwidth: <10HZ
Temperature Sensor

Range: 0 - 50°C

Accuracy: ±2°C typ


Humidity Sensor

Range: 10% - 80% RH @ 25°C

Accuracy: ±5% typ

Operating

Temperature: 5°C to 35°C

Humidity: to 80%, non condensing

Battery life: Typ > 6 hrs

Charge Time: < 8 hrs to > 90% capacity

Power

Voltage: 90 - 250 VAC 50/60 Hz

Wattage: < 12 watts operating

Data Storage 1500 Readings
CPM Size: 11” x 9” x 6” (280 x 229 x 152 mm)
Weight 12½lb. (5.7kg)

        

 
  • NEW: Auto Ranging to 0.1V resolution below 100V
  • NEW: Compatible with Monroes Optional New 288B Graphing Software
  • Test all types of Ionizers
  • Automated testing reduces ionizer test time and data logging time
  • Adjustable start and stop voltages for decay test accommodate specialized needs
  • Large, easy-to-read, high-contrast LCD display
  • Detachable ion collecting plates can be placed at the work height or placed within process equipment to evaluate ionizers while in use
  • Small ion collecting plates are available to permit measurements in confined spaces
  • LED bar graph shows balance voltage in real time

Related Products

Trek 1501 hand-held surface resistance meter

Trek 1501 hand-held surface resistance meter

Trek PD04002A charged plate monitor controller

Trek PD04002A charged plate monitor controller

Monroe 300 Charge Plate Analyzer

Monroe 300 Charge Plate Analyzer

Monroe 268A Charge Plate Analyzer

Monroe 268A Charge Plate Analyzer

Monroe 282CPS Charge Plate System

Monroe 282CPS Charge Plate System

line

透過行動條碼加入LINE好友

請在LINE應用程式上開啟「好友」分頁,點選畫面右上方用來加入好友的圖示,接著點選「行動條碼」,然後掃描此行動條碼。