Trek 603 High Voltage Amplifier
Advanced Energy’s Trek 603 is a high voltage DC power amplifier and piezo driver. It provides precise control of output voltages in bipolar or unipolar ranges that are customer-defined.
• Output Voltage: 0 to +250 V DC or peak AC model dependent
• Output Current: 0 to ±40 mA DC or ±80 mA peak AC for 1 ms
• Slew Rate: Greater than 100 V/µs
• Large Signal Bandwidth: DC to greater than 150 kHz (5% distortion)
• Gain: 50 V/V or 25 V/V
Select from Available Ranges and Options
The Trek 603 high-voltage amplifier/piezo driver offers precise control of output voltages in customer-specified bipolar or unipolar ranges.
Meet the Demands of Reactive Loads
The Trek 603 achieves accurate output responses and high slew rates by utilizing a four-quadrant active output stage that sinks or sources current into reactive or resistive loads. It’s configured as a non-inverting amplifier and is available in single or dual-channel packaging.
Benefits
- Use on a benchtop or in a 19-in rack
- Drive capacitive loads via a four-quadrant output
- Enable high accuracy thanks to a closed-loop system
- Safeguard equipment with short-circuit protection
- Take advantage of low-output noise and ultra-accurate outputs
Dimensions
Single Channel Instrument: 222.3 mm H x 108 mm W 381 mm D (8.75” H x 4.25” W x 15” D)
Double Channel Instrument: 433.8 mm H x 108 mm W 381 mm D (17” H x 4.25” W x 15” D)
Weight
Single Channel Instrument: 4.3 kg (9.4 lb)
Double Channel Instrument: 8.6 (18.8 lb)
HV Connector: SHV High Voltage Connector
BNC Connectors: Power Switch, Amplifier Input, Voltage Monitor, Current Monitor, High Voltage ON/OFF, Digital Enable
Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: To 85%, noncondensing
Altitude: To 2000 meters (6561.68 ft.)
- Up to two independent amplifier channels in one enclosure
- CE compliant for assured reliability
- Reprogrammable factory-set output configurations
- Dynamic Adjustment to optimize the AC response for various load parameters
- Load range switch
- Driving piezoelectric actuators
- Modulating electrooptics
- Electrostatically controlling ion beams
- Providing remote ON/OFF capabilities for automated or computer controlled systems
